lkml.org 
[lkml]   [1998]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.1.103 crashes during IDE probing (2.1.101 ok)

On Thu, 28 May 1998, Erik Andersen wrote:

> On Thu, 28 May 1998, Linux Lists wrote:
>
> > Hi there,
> >
> > I've tried to compile the stock kernel 2.1.103 and during boot it crashes
> > as follows:
> >
> > Starting kswapd v 1.5
> > PIIX3: IDE controller on PCI bus 00 dev 39
> > PIIX3: not 100% native mode: will probe irqs later
> > ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
> > Unable to handle kernel paging request at virtual address fec00000
> > current->tss.cr3 = 00101000, %cr3 = 00101000
> > *pde = 001fd067
> > *pte = 00000000
> > Oops: 0002
> > CPU: 0
> > EIP: 0010:[<c0110590>]
> > EFLAGS: 00010013
> > eax: 00000011 ebx: 00000011 ecx: 00000017 edx: c01fbbc4
> > esi: 00000000 edi: c01fbbc4 ebp: c01fbbe0 esp: c026be90
> > ds: 0018 es: 0018 ss: 0018
> [------snip---------]
>
> You need to do a `make mrproper` to get rid of the old stuff (there doesn't
> seem to be a proper dependancy set up for the master Makefile). Then
> do your re-compile for UP and it will work.

Yeah, it worked. Thank you very much.

Now a question: why does it crash when SMP = 1 ?? Is it supposed to when
the machine is UP ?? I remember never having problems with SMP kernels
running on UP systems, at least up to 2.1.101 (which is the last one I
used prior to 2.1.103). Just want to know the reason ...

Thanks again for your help.

Regards,
Ivan Passos



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:42    [W:0.035 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site