[lkml]   [1998]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: Driver for EMS boards.

    -----Original Message-----
    From: Mike A. Harris <>
    To: Anthony Barbachan <>
    Cc: Linux Kernel mailing list <>
    Date: Saturday, May 23, 1998 4:30 AM
    Subject: Re: Driver for EMS boards.

    >On Wed, 20 May 1998, Anthony Barbachan wrote:
    >> >> possible. However if you have the original DOS drivers, you can get
    >> >> information by disassembling the drivers and tracing down generalities
    >> >> how they work.
    >> >
    >> >Yes, I have downloaded the driver for DOS from AST. It is
    >> >called: REMM.SYS. It is from the file REMM470.ZIP from their ftp
    >> >site. I used a DOS DEBUG script to disassemble the file, and
    >> CV.EXE on a running driver would work better.
    >> I think DEBUG.EXE also would also work on a running driver, but it will
    >> alot more difficult to look around with debug.
    >Yeah, ok, sounds good. I'll use Turbo Debugger on it I guess.
    >> >Where DX is not easily determined because it is calculated from
    >> >some existing value via a prior INC or DEC instruction, or an OR
    >> >or AND instruction. ;o(
    >> >
    >> >Some of the hard coded addresses that I found are:
    >> >
    >> >0x43, 0xFB, 0xE8, 0xEA, 0xF9, 0xE072, 0xE872
    >> Any jumpers on the card? I think it may be unlikely that AST would have
    >> hard coded the address into their driver.
    >Yes, there are 5 jumpers on the card, labeled E1-E5.
    >E2 is currently turned ON, and a spare is turned OFF sitting on
    >E1. I suspect that the jumpers choose the page frame, and
    >something else... I don't know what though.

    If you need to locate the current page frame you can probably use msd.exe.

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to

     \ /
      Last update: 2005-03-22 13:42    [W:0.026 / U:6.192 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site