lkml.org 
[lkml]   [1998]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: kernel 2.1.103 boot hangs (panics actually)
In article <Pine.LNX.3.96.980521042358.615A-100000@kosh.cococo.net> you write:
>
>
>On Thu, 21 May 1998, Harry Ronis wrote:
>
>> hangs on message ....
>> unable to handle kernel paging request
>> current tss cr3=00101000, cr3=00101000
>>
>> need to shut off and restart machine
>>
>> any ideas??
>>
>
> Same here,
>
>System PII 266
>AOpen LX440 Motherboard
>192M Ram
>
> I replaced arch/i386/kernel/io_apic.c and arch/i386/kernel/irq.c with
>the ones from the 2.1.102 kernel source and it fixed the problem. It
>booted anyway, and is showing no signs of trouble, to the best of my
>knowledge.
>
>Compiled it earlier on a P200MMX and didn't have any problems.
>If that means anything.

2.1.103 with SMP=1 also crashes for me either during boot or
within a few seconds after that on a uniprocessor 440LX 300MHz
Pentium II Intel motherboard, and following your suggestion of
rebuilding in 2.1.102's io_apic.c and irq.c also made the problem
go away for me.

Is everyone who is experiencing this problem running on a motherboard
that can only take one CPU?

Adam J. Richter __ ______________ 4880 Stevens Creek Blvd, Suite 205
adam@yggdrasil.com \ / San Jose, California 95129-1034
+1 408 261-6630 | g g d r a s i l United States of America
fax +1 408 261-6631 "Free Software For The Rest Of Us."

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:42    [W:0.204 / U:1.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site