lkml.org 
[lkml]   [1998]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject2.1.99 - aic7xxx problems
Date
Tried 2.1.99 today on my new PII/233 (M-Technology M668 board).  Got tons of
SCSI disk errors immediately during the boot process and all subsequent disk
syncs. I noticed the new aic7xxx driver recognized the BIOS setting of
EXTENDED so I disabled that in the BIOS and it still had the same problems.
I have about a week to play with this machines so if anyone wants me to test
anything please let me know (like maybe putting the old drivers back in?).


...here's a few of the errors:

scsidisk I/O error: dev 08:03, sector 3396236
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
SCSI disk error : host 0 channel 0 id 8 lun 0 return code = 80000
scsidisk I/O error: dev 08:03, sector 65560
IO error syncing ext2 inode [08:03:00002006]
scsi : aborting command due to timeout : pid 1761, scsi0, channel 0, id 8,
lun 0 Write (10) 00 00 4f 32 97 00 00 02 00
(scsi0:0:8:0) Using wide (16 bit) transfers.
(scsi0:0:8:0) Synchronous at 20.0MHz, offset 8.
SCSI disk error : host 0 channel 0 id 8 lun 0 return code = 18000002
extra data not valid Current error sd08:03: sense key Aborted Command
Additional sense indicates Scsi parity error
scsidisk I/O error: dev 08:03, sector 2179098
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
SCSI disk error : host 0 channel 0 id 8 lun 0 return code = 80000
scsidisk I/O error: dev 08:03, sector 163886
(scsi0:0:8:0) Using wide (16 bit) transfers.
(scsi0:0:8:0) Synchronous at 20.0MHz, offset 8.
SCSI disk error : host 0 channel 0 id 8 lun 0 return code = 18000002
extra data not valid Current error sd08:03: sense key Aborted Command
Additional sense indicates Scsi parity error


Reboot to 2.1.98 and it locked up during the fsck. I am now running 2.1.95
with no problems and no errors.

Here's the boot info:
May 1 07:59:07 srv1 syslogd 1.3-0#: restart.

2.1.99 messages:
May 1 07:59:07 srv1 kernel: Loaded 7621 symbols from /System.map.
May 1 07:59:07 srv1 kernel: Symbols match kernel version.
May 1 07:59:07 srv1 kernel: 48k init)
May 1 07:59:07 srv1 kernel: Swansea University Computer Society NET3.039
for Linux 2.1
May 1 07:59:07 srv1 kernel: NET3: Unix domain sockets 0.16 for Linux
NET3.038.
May 1 07:59:07 srv1 kernel: Swansea University Computer Society TCP/IP for
NET3.037
May 1 07:59:07 srv1 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
May 1 07:59:07 srv1 kernel: GRE over IPv4 tunneling driver
May 1 07:59:07 srv1 kernel: early initialization of device gre0 is deferred
May 1 07:59:07 srv1 kernel: Linux IP multicast router 0.06 plus PIM-SM
May 1 07:59:07 srv1 kernel: Appletalk 0.18 for Linux NET3.037
May 1 07:59:07 srv1 kernel: Checking 386/387 coupling... Ok, fpu using
exception 16 error reporting.
May 1 07:59:07 srv1 kernel: Checking 'hlt' instruction... Ok.
May 1 07:59:07 srv1 kernel: parport0: PC-style at 0x378 [SPP,ECP,ECPPS2]
May 1 07:59:07 srv1 kernel: parport0: no IEEE-1284 device present.
May 1 07:59:07 srv1 kernel: Serial driver version 4.25 with enabled
May 1 07:59:07 srv1 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
May 1 07:59:07 srv1 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
May 1 07:59:07 srv1 kernel: lp0: using parport0 (polling).
May 1 07:59:07 srv1 kernel: PS/2 auxiliary pointing device detected --
driver installed.
May 1 07:59:07 srv1 kernel: Uniform CD-ROM driver Revision: 2.12
May 1 07:59:07 srv1 kernel: Floppy drive(s): fd0 is 1.44M
May 1 07:59:07 srv1 kernel: FDC 0 is a National Semiconductor PC87306
May 1 07:59:07 srv1 kernel: (scsi0) <Adaptec AIC-7880 Ultra SCSI host
adapter> found at PCI 11/0
May 1 07:59:07 srv1 kernel: (scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
May 1 07:59:07 srv1 kernel: (scsi0) BIOS enabled, IO Port 0xdc00, IRQ 16
May 1 07:59:07 srv1 kernel: (scsi0) IO Memory at 0xeeffe000, MMAP Memory at
0xc8800000
May 1 07:59:07 srv1 kernel: (scsi0) Resetting channel
May 1 07:59:07 srv1 kernel: (scsi0) Downloading sequencer code... 413
instructions downloaded
May 1 07:59:07 srv1 kernel: (scsi0:0:-1:-1) Scanning channel for devices.
May 1 07:59:07 srv1 kernel: (scsi0:0:8:0) Using wide (16 bit) transfers.
May 1 07:59:07 srv1 kernel: (scsi0:0:8:0) Synchronous at 20.0MHz, offset 8.
May 1 07:59:07 srv1 kernel: (scsi0:0:8:0) Using wide (16 bit) transfers.
May 1 07:59:07 srv1 kernel: (scsi0:0:8:0) Synchronous at 20.0MHz, offset 8.

/proc/scsi/aix7xxx/0 (from 2.1.99)
Adaptec AIC7xxx driver version: 5.0.13/3.2.4
Compile Options:
AIC7XXX_RESET_DELAY : 15
AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled
Check below to see which
devices use tagged queueing
AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option)
AIC7XXX_PROC_STATS : Enabled

Adapter Configuration:
SCSI Adapter: Adaptec AIC-7880 Ultra SCSI host adapter
Ultra Wide Controller
PCI MMAPed I/O Base: 0xeeffe000
Adaptec SCSI BIOS: Enabled
IRQ: 16
SCBs: Active 0, Max Active 1,
Allocated 30, HW 16, Page 255
Interrupts: 6361
BIOS Control Word: 0x18b6
Adapter Control Word: 0x007e
Extended Translation: Disabled
SCSI Bus Reset: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0xffff
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 8
Tagged Queue By Device array for aic7xxx host instance 0:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}

Statistics:
(scsi0:0:8:0)
nxfers 1583 (1360 read;223 written)
blks(512) rd=10055; blks(512) wr=580
< 512 512-1K 1-2K 2-4K 4-8K 8-16K 16-32K 32-64K 64-128K >128K
Reads: 0 1 783 24 257 284 3 4 4 0
Writes: 0 0 183 33 6 1 0 0 0 0



/proc/scsi/aix7xxx/0 (from 2.1.95)
Adaptec AIC7xxx driver version: 4.1/3.2
Compile Options:
AIC7XXX_RESET_DELAY : 15
AIC7XXX_CMDS_PER_LUN : 8
AIC7XXX_TAGGED_QUEUEING: Enabled
AIC7XXX_PAGE_ENABLE : Enabled
AIC7XXX_PROC_STATS : Enabled

Adapter Configuration:
SCSI Adapter: Adaptec AIC-7880 Ultra SCSI host adapter
(AIC-788x chipset)
Host Bus: Wide
Base IO: 0xdc00
Base IO Memory: 0xeeffe000
IRQ: 16
SCBs: Used 8, HW 16, Page 255
Interrupts: 8635
Serial EEPROM: False
Extended Translation: Disabled
SCSI Bus Reset: Enabled
Ultra SCSI: Enabled
Disconnect Enable Flags: 0xffff
Statistics:
CHAN#A (TGT 8 LUN 0):
nxfers 8603 (7418 read;1185 written)
blks(512) rd=208896; blks(512) wr=6666
< 512 512-1K 1-2K 2-4K 4-8K 8-16K 16-32K 32-64K 64-128K >128K
Reads: 1 0 3699 134 915 971 62 1633 3 0
Writes: 0 0 846 73 13 253 0 0 0 0


My config:

#
# Automatically generated make config: don't edit
#

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M686 is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_KMOD is not set

#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_OPTIMIZE is not set
CONFIG_PCI_OLD_PROC=y
# CONFIG_MCA is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_BINFMT_JAVA is not set
# CONFIG_VIDEO_SELECT is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_OTHER is not set

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_PARPORT=y

#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_IDE_CHIPSETS is not set

#
# Additional Block Devices
#
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_STRIPED=y
CONFIG_MD_MIRRORING=y
CONFIG_MD_RAID5=y
CONFIG_MD_BOOT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE_PARPORT=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_HD is not set

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_NETLINK=y
# CONFIG_RTNETLINK is not set
CONFIG_NETLINK_DEV=y
# CONFIG_FIREWALL is not set
CONFIG_NET_ALIAS=y
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_IP_ACCT is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_IP_ALIAS=y
CONFIG_SYN_COOKIES=y

#
# (it is safe to leave these untouched)
#
# CONFIG_INET_RARP is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_IPV6=m
CONFIG_IPV6_EUI64=y
# CONFIG_IPV6_NO_PB is not set
# CONFIG_IPV6_NETLINK is not set

#
#
#
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_PROFILE is not set

#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_OVERRIDE_CMDS=y
CONFIG_AIC7XXX_CMDS_PER_LUN=8
CONFIG_AIC7XXX_PROC_STATS=y
CONFIG_AIC7XXX_RESET_DELAY=15
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_ETHERTAP is not set
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
CONFIG_EL2=y
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
CONFIG_VORTEX=y
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=y
# CONFIG_ULTRA is not set
# CONFIG_ULTRA32 is not set
# CONFIG_SMC9194 is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_EISA=y
# CONFIG_PCNET32 is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DE4X5 is not set
# CONFIG_DEC_ELCP is not set
# CONFIG_DGRS is not set
# CONFIG_EEXPRESS_PRO100 is not set
# CONFIG_ES3210 is not set
CONFIG_EPIC100=y
# CONFIG_TLAN is not set
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set
# CONFIG_FDDI is not set
# CONFIG_DLCI is not set
# CONFIG_LTPC is not set
# CONFIG_COPS is not set
# CONFIG_IPDDP is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_RADIO is not set
# CONFIG_TR is not set
# CONFIG_SHAPER is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_MINIX_FS=y
CONFIG_EXT2_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
# CONFIG_NFSD is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_CODA_FS=m
CONFIG_SMB_FS=y
CONFIG_SMB_WIN95=y
# CONFIG_HPFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_KOI8_R=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_PRINTER=y
CONFIG_PRINTER_READBACK=y
CONFIG_MOUSE=y
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_APM is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WDT is not set
CONFIG_SOFT_WATCHDOG=y
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_RTC is not set
# CONFIG_VIDEO_DEV is not set
# CONFIG_NVRAM is not set
# CONFIG_JOYSTICK is not set
# CONFIG_MISC_RADIO is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# Kernel hacking
#
# CONFIG_PROFILE is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_VGA_CONSOLE=y













-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:42    [W:0.752 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site