lkml.org 
[lkml]   [1998]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectCongratulations on 2.1.92...


I mostly lurk in the kernel-digest and would just like to take
this opportunity to congratulate everyone involved in 2.1.xx...

I've found it to be very stable on my Compaq Professional W/S 5000,
with NEC Scsi, IDE, ESS 1868, Two Dual Pentium Pro's and 64Mb RAM.

It's been pretty stable, and I've not really had any swap hassles...


The only thing that bothers me in the attached dmesg is the following:

PCI_IDE: unknown IDE controller on PCI bus 0 function 161, VID=0e11,
DID=ae33
PCI->APIC IRQ transform: (B0,I20,P0) -> -1
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:DMA
PCI_IDE: simplex device: DMA disabled
ide1: PCI_IDE Bus-Master DMA disabled (BIOS), pcicmd=0x0005,
ccode=0x101ea0a, dma_base=0x000

DMA Disabled? Is this normal, or is it caused by a strange IDE controller?

Also, hehe, does anyone have a later patch for the penguin bootup logo
ready?

Regards,
Roelf Diedericks (roelf@ttdesk.co.za)
http://rodent.ml.org
BLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 11, 15disabling PIRQ0
disabling PIRQ1
disabling PIRQ2
disabling PIRQ3
, 22, 23 not connected.
nr of MP irq sources: 31.
nr of IOAPIC registers: 24.
testing the IO APIC.......................
.... register #00: 08000000
....... : physical APIC id: 08
.... register #01: 00170011
....... : max redirection entries: 0017
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 0FF 0F 0 0 0 0 0 1 1 69
04 0FF 0F 0 0 0 0 0 1 1 71
05 0FF 0F 0 0 0 0 0 1 1 79
06 0FF 0F 0 0 0 0 0 1 1 81
07 0FF 0F 0 0 0 0 0 1 1 89
08 0FF 0F 0 0 0 0 0 1 1 91
09 0FF 0F 0 0 0 0 0 1 1 99
0a 0FF 0F 0 0 0 0 0 1 1 A1
0b 000 00 1 0 0 0 0 0 0 00
0c 0FF 0F 0 0 0 0 0 1 1 B1
0d 000 00 1 0 0 0 0 0 0 00
0e 0FF 0F 0 0 0 0 0 1 1 C1
0f 000 00 1 0 0 0 0 0 0 00
10 0FF 0F 0 1 0 1 0 1 1 D1
11 0FF 0F 0 1 0 1 0 1 1 D9
12 0FF 0F 0 1 0 1 0 1 1 E1
13 0FF 0F 0 1 0 1 0 1 1 E9
14 0FF 0F 0 1 0 1 0 1 1 F1
15 0FF 0F 0 1 0 1 0 1 1 F9
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
.................................... done.
Starting kswapd v 1.5
PS/2 auxiliary pointing device detected -- driver installed.
Real Time Clock Driver v1.09
Sound initialization started
<ESS ES1688 AudioDrive (rev 11) (3.1)> at 0x220 irq 5 dma 1,0
Sound initialization complete
Uniform CD-ROM driver Revision: 2.12
PCI_IDE: unknown IDE controller on PCI bus 0 function 161, VID=0e11, DID=ae33
PCI->APIC IRQ transform: (B0,I20,P0) -> -1
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:DMA
PCI_IDE: simplex device: DMA disabled
ide1: PCI_IDE Bus-Master DMA disabled (BIOS), pcicmd=0x0005, ccode=0x101ea0a, dma_base=0x0000
hda: Maxtor 83209A5, ATA DISK drive
hdb: MATSHITA CR-583, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: Maxtor 83209A5, 3060MB w/256kB Cache, CHS=776/128/63, DMA
hdb: ATAPI 8X CDROM drive, 128kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
ncr53c8xx: at PCI bus 1, device 12, function 0
PCI->APIC IRQ transform: (B1,I12,P0) -> 21
ncr53c8xx: 53c875 detected
ncr53c875-0: rev=0x03, base=0x40080000, io_port=0x1000, irq=21
ncr53c875-0: ID 7, Fast-20, Parity Checking
ncr53c875-0: on-board RAM at 0x40000000
ncr53c875-0: restart (scsi reset).
ncr53c875-0: copying script fragments into the on-board RAM ...
scsi0 : ncr53c8xx - revision 2.5f
scsi : 1 host.
ncr53c875-0-<0,0>: FAST-5 WIDE SCSI 10.0 MB/s (200 ns, offset 15)
Vendor: COMPAQ Model: ST32171W Rev: 0388
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
scsi : detected 1 SCSI disk total.
ncr53c875-0-<0,0>: FAST-5 WIDE SCSI 10.0 MB/s (200 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4110000 [2006 MB] [2.0 GB]
Partition check:
sda: sda1 < sda5 > sda3 sda4
hda: hda1 hda2 < hda5 hda6 >
NTFS version 980101
VFS: Mounted root (ext2 filesystem) readonly.
Starting kmod
Freeing unused kernel memory: 52k freed
Adding Swap: 124956k swap-space (priority -1)
\
 
 \ /
  Last update: 2005-03-22 13:42    [W:0.035 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site