lkml.org 
[lkml]   [1998]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subject2.1.98 lock on bootup
From
Date
When booting 2.1.98 get complete lockup after floppy.  No scsi is ever
identified.

2.1.97 would lock up 8-12 hours after booting.

output of mptable included from 2.1.92 (last stable for me)

System is a Dual P133 SMP machine with 128M ram. ALR Revolution MP.

Ted Serreyn

============================================================================
===

MPTable, version 2.0.12

----------------------------------------------------------------------------
---

MP Floating Pointer Structure:

location: EBDA
physical address: 0x0009fc30
signature: '_MP_'
length: 16 bytes
version: 1.1
checksum: 0x9d
mode: Virtual Wire

----------------------------------------------------------------------------
---

MP default config type: 6

bus: EISA+PCI, APIC: Integrated

----------------------------------------------------------------------------
---

dmesg output:

QFull 16, QMask 0x1f
PCI->APIC IRQ transform: (B0,I14,P0) -> -1
aic7xxx: <Adaptec AHA-294X SCSI host adapter> at PCI 14
aic7xxx: BIOS enabled, IO Port 0x9800, IO Mem 0x84002000, IRQ 15
aic7xxx: Single Channel, SCSI ID 7, 16/255 SCBs, QFull 16, QMask 0x1f
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1/3.2
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1/3.2
scsi2 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1/3.2
scsi : 3 hosts.
scsi0: Scanning channel A for devices.
Vendor: SEAGATE Model: ST15150W Rev: 0009
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST15150W Rev: 0009
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: SEAGATE Model: ST32550W Rev: 0012
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi0, channel 0, id 12, lun 0
scsi1: Scanning channel A for devices.
Vendor: SEAGATE Model: ST410800W Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdd at scsi1, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST12550W Rev: 0004
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sde at scsi1, channel 0, id 9, lun 0
Vendor: SEAGATE Model: ST12550W Rev: 0004
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdf at scsi1, channel 0, id 10, lun 0
scsi2: Scanning channel A for devices.
Vendor: MII SC31 Model: ScanMakerIISP600 Rev: 1.11
Type: Scanner ANSI SCSI revision: 01 CCS
Detected scsi generic sgg at scsi2, channel 0, id 2, lun 0
Vendor: IMS Model: CDD2000/00 Rev: 1.26
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi2, channel 0, id 3, lun 0
Vendor: SONY Model: SDT-5000 Rev: 3.26
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi2, channel 0, id 4, lun 0
Vendor: PLEXTOR Model: CD-ROM PX-6XCS Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi2, channel 0, id 5, lun 0
Vendor: PLEXTOR Model: CD-ROM PX-12TS Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi2, channel 0, id 6, lun 0
scsi : detected 1 SCSI tape 3 SCSI cdroms 6 SCSI disks total.
Uniform CD-ROM driver Revision: 2.12
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1 GB]
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 4194058 [2047 MB] [2.0 GB]
SCSI device sdd: hdwr sector= 512 bytes. Sectors= 17755614 [8669 MB] [8.7 GB]
SCSI device sde: hdwr sector= 512 bytes. Sectors= 4178874 [2040 MB] [2.0 GB]
SCSI device sdf: hdwr sector= 512 bytes. Sectors= 4178874 [2040 MB] [2.0 GB]
eth0: 3c509 at 0x6000 tag 0, 10baseT port, address 00 20 af 1d 73 d6, IRQ 9.
3c509.c:1.07 6/15/95 becker@cesdis.gsfc.nasa.gov
Partition check:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sdc: sdc1 sdc2 sdc3
sdd: sdd1 sdd2 sdd3 sdd4
sde: sde1
sdf: sdf1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Adding Swap: 130748k swap-space (priority -1)
Adding Swap: 130748k swap-space (priority -2)
Adding Swap: 130748k swap-space (priority -3)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 3.1 detected OK (220)
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
cat uses obsolete /proc/pci interface


---------------
scanpci output:

PCI says configuration type 2

PCI probing configuration type 1
Probing for devices on PCI bus 0:


PCI probing configuration type 2

pci bus 0x0 slot at 0xc000, vendor 0x8086 device 0x04a3
Intel 82434LX/NX pci cache mem controller
STATUS 0x2400 COMMAND 0x0146
CLASS 0x06 0x00 0x00 REVISION 0x11
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00

pci bus 0x0 slot at 0xc200, vendor 0x8086 device 0x0482
Intel 82375EB pci-eisa bridge
STATUS 0x0200 COMMAND 0x0007
CLASS 0x00 0x00 0x00 REVISION 0x03
BIST 0x00 HEADER 0x00 LATENCY 0xf8 CACHE 0x00
BYTE_0 0x60 BYTE_1 0x98 BYTE_2 0x04 BYTE_3 0x00

pci bus 0x0 slot at 0xc300, vendor 0x1045 device 0xc621
Opti 82C621
STATUS 0x0280 COMMAND 0x0001
CLASS 0x01 0x01 0x0f REVISION 0x00
BASE0 0x00005801 addr 0x00005800 I/O
BASE1 0x00005809 addr 0x00005808 I/O
BASE2 0x00005811 addr 0x00005810 I/O
BASE3 0x00005819 addr 0x00005818 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x14

pci bus 0x0 slot at 0xcc00, vendor 0x9004 device 0x7178
Adaptec 2940
STATUS 0x0280 COMMAND 0x0117
CLASS 0x01 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x04
BASE0 0x00009001 addr 0x00009000 I/O
BASE1 0x84000000 addr 0x84000000 MEM
MAX_LAT 0x08 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0x00 BYTE_1 0x05 BYTE_2 0x00 BYTE_3 0x00

pci bus 0x0 slot at 0xcd00, vendor 0x9004 device 0x7178
Adaptec 2940
STATUS 0x0280 COMMAND 0x0117
CLASS 0x01 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x04
BASE0 0x00009401 addr 0x00009400 I/O
BASE1 0x84001000 addr 0x84001000 MEM
MAX_LAT 0x08 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x00 BYTE_1 0x05 BYTE_2 0x00 BYTE_3 0x00

pci bus 0x0 slot at 0xce00, vendor 0x9004 device 0x7178
Adaptec 2940
STATUS 0x0280 COMMAND 0x0117
CLASS 0x01 0x00 0x00 REVISION 0x03
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x04
BASE0 0x00009801 addr 0x00009800 I/O
BASE1 0x84002000 addr 0x84002000 MEM
MAX_LAT 0x08 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0f
BYTE_0 0x80 BYTE_1 0x05 BYTE_2 0x00 BYTE_3 0x00

pci bus 0x0 slot at 0xcf00, vendor 0x5333 device 0x883d
S3 ViRGE/VX
STATUS 0x0200 COMMAND 0x0007
CLASS 0x03 0x00 0x00 REVISION 0x02
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0x80000000 addr 0x80000000 MEM
MAX_LAT 0xff MIN_GNT 0x04 INT_PIN 0x01 INT_LINE 0x00


-----------------
/proc/pci output:

PCI devices found:
Bus 0, device 15, function 0:
VGA compatible controller: S3 Inc. ViRGE/VX (rev 2).
Medium devsel. Master Capable. Latency=64. Min Gnt=4.Max Lat=255.
Non-prefetchable 32 bit memory at 0x80000000 [0x80000000].
Bus 0, device 14, function 0:
SCSI storage controller: Adaptec AIC-7871 (rev 3).
Medium devsel. Fast back-to-back capable. IRQ f. Master Capable. Latency=64. Min Gnt=8.Max Lat=8.
I/O at 0x9800 [0x9801].
Non-prefetchable 32 bit memory at 0x84002000 [0x84002000].
Bus 0, device 13, function 0:
SCSI storage controller: Adaptec AIC-7871 (rev 0).
Medium devsel. Fast back-to-back capable. IRQ b. Master Capable. Latency=64. Min Gnt=8.Max Lat=8.
I/O at 0x9400 [0x9401].
Non-prefetchable 32 bit memory at 0x84001000 [0x84001000].
Bus 0, device 12, function 0:
SCSI storage controller: Adaptec AIC-7871 (rev 0).
Medium devsel. Fast back-to-back capable. IRQ a. Master Capable. Latency=64. Min Gnt=8.Max Lat=8.
I/O at 0x9000 [0x9001].
Non-prefetchable 32 bit memory at 0x84000000 [0x84000000].
Bus 0, device 3, function 0:
IDE interface: OPTi 82C621 (rev 0).
Medium devsel. Fast back-to-back capable. IRQ 14.
I/O at 0x5800 [0xfdf1].
I/O at 0x5808 [0xfff5].
I/O at 0x5810 [0x171].
I/O at 0x5818 [0x375].
Bus 0, device 2, function 0:
Non-VGA device: Intel 82375EB (rev 3).
Medium devsel. Master Capable. Latency=248.
Bus 0, device 0, function 0:
Host bridge: Intel 82434LX Mercury/Neptune (rev 17).
Slow devsel. Master Capable. Latency=32.


------------------------
/proc/interrupts output:

CPU0 CPU1
0: 30592 48016 IO-APIC timer
1: 451 931 IO-APIC keyboard
2: 0 0 XT PIC cascade
3: 458 872 IO-APIC serial
5: 2 0 IO-APIC soundblaster
8: 1 0 IO-APIC rtc
9: 169 332 IO-APIC 3c509
10: 6563 6199 IO-APIC aic7xxx
11: 2789 480 IO-APIC aic7xxx
13: 4 0 XT PIC fpu
15: 6 24 IO-APIC aic7xxx
NMI: 0
IPI: 0

============================================================================
===


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:42    [W:0.041 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site