lkml.org 
[lkml]   [1998]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ncr53c875 driver

Hello Sage,

On Thu, 5 Feb 1998, sage wrote:
> Hey,
>
> I'm having trouble getting any kernel I build to recognize my
> ncr53c875-based SCSI card. I'm trying to build a 2.0.33 kernel,
> although I tried 2.0.32 as well without any luck. With .33 it finds my
> adaptec 2940 just fine but misses the ncr completely. With .32 it still
> found the 2940 but gave me a bunch of scsi bus reset timeout-type
> errors.
>
> Booting with the standard debian 2.0.29 kernel found the card without
> any problems.
>
> Is there anything tricky about building a kernel with the ncr53c7,8xx
^^^^^^^^^^^
No, No, Bad Sage . Use the ncr53c8xx driver just below
this one in the config ...... Hth

> driver? Is there something simple I'm missing? (I tried various
> combinations of the options menuconfig gave me with .33 with the same
> results... always negotiate synchronous transfers, allow FAST-SCSI, and
> allow disconnect.)
>
> Any suggestions would be greatly appreciated! thanks in advance--
> sage
>

, JimL
+-----------------------------------------------------------------------+
| James W. Laferriere - Network Engineer - babydr@nwrain.net |
| System Techniques - 25416 - 22nd S. - Kent, WA 98032 |
| Give me VMS -or- Give me Linux -but- only on AXP |
+-----------------------------------------------------------------------+
|-> Linux-Vax Port, Now in Progress !YAY! there's Progress To Report <-|
|-> Please See http://ucnet.canberra.edu.au/~mikal/vaxlinux/home.html <-|
|-> Maintainer: Michael Still mikal@blitzen.canberra.edu.au <-|
+-----------------------------------------------------------------------+

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:41    [W:0.042 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site