lkml.org 
[lkml]   [1998]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectsmp-2.1.86 can't find keyboard?
Below I have the /var/log/syslog.kern files from a 2.1.86 then a
2.1.85 boot. This is from a Micron dual-pentium pro system. The
reason I'm shipping this log for to you... is because linux-2.1.86
seems to be unable to find my keyboard :-*:

note:

linux-2.1.86: Unknown interrupt
linux-2.1.86: Serial driver version 4.24 with no serial options enabled
linux-2.1.86: Keyboard timeout

Any suggestions?


-log-start-

linux-2.1.86: Loaded 6402 symbols from /System.map.
linux-2.1.86: Symbols match kernel version.
linux-2.1.86: Linux version 2.1.86 (root@pike) (gcc version 2.8.0) #1 Wed Feb 11 17:21:06 CST 1998
linux-2.1.86: Intel MultiProcessor Specification v1.4
linux-2.1.86: Virtual Wire compatibility mode.
linux-2.1.86: OEM ID: INTEL Product ID: 440FX APIC at: 0xFEE00000
linux-2.1.86: Processor #1 Pentium(tm) Pro APIC version 17
linux-2.1.86: Processor #0 Pentium(tm) Pro APIC version 17
linux-2.1.86: I/O APIC #2 Version 17 at 0xFEC00000.
linux-2.1.86: Processors: 2
linux-2.1.86: INIT IRQ
linux-2.1.86: Console: 16 point font, 400 scans
linux-2.1.86: Console: colour VGA+ 80x25, 1 virtual console (max 63)
linux-2.1.86: PCI: BIOS32 Service Directory structure at 0xc00f9a30
linux-2.1.86: PCI: BIOS32 Service Directory entry at 0xfd7da
linux-2.1.86: PCI: PCI BIOS revision 2.10 entry at 0xfd9d6
linux-2.1.86: Probing PCI hardware.
linux-2.1.86: PCI->APIC IRQ transform: (B0,I0,P-1) -> -1
linux-2.1.86: PCI->APIC IRQ transform: (B0,I7,P-1) -> -1
linux-2.1.86: PCI->APIC IRQ transform: (B0,I7,P-1) -> -1
linux-2.1.86: PCI->APIC IRQ transform: (B0,I15,P0) -> -1
linux-2.1.86: PCI->APIC IRQ transform: (B0,I16,P0) -> -1
linux-2.1.86: PCI->APIC IRQ transform: (B0,I17,P0) -> -1
linux-2.1.86: Calibrating delay loop... 199.07 BogoMIPS
linux-2.1.86: Memory: 127836k/131072k available (1024k kernel code, 400k reserved, 1784k data, 28k init)
linux-2.1.86: Swansea University Computer Society NET3.039 for Linux 2.1
linux-2.1.86: NET3: Unix domain sockets 0.16 for Linux NET3.038.
linux-2.1.86: Swansea University Computer Society TCP/IP for NET3.037
linux-2.1.86: IP Protocols: ICMP, UDP, TCP
linux-2.1.86: VFS: Diskquotas version dquot_5.6.0 initialized
linux-2.1.86:
linux-2.1.86: Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
linux-2.1.86: Checking 'hlt' instruction... Ok.
linux-2.1.86: POSIX conformance testing by UNIFIX
linux-2.1.86: CPU1: Intel Pentium Pro stepping 09
linux-2.1.86: calibrating APIC timer ...
linux-2.1.86: ..... CPU clock speed is 199.3018 MHz.
linux-2.1.86: ..... APIC bus clock speed is 66.4336 MHz.
linux-2.1.86: Booting processor 0 eip 2000: Calibrating delay loop... 199.07 BogoMIPS
linux-2.1.86: OK.
linux-2.1.86: CPU0: Intel Pentium Pro stepping 09
linux-2.1.86: Total of 2 processors activated (398.13 BogoMIPS).
linux-2.1.86: mapping IO APIC from standard address.
linux-2.1.86: new virtual address: c8802000.
linux-2.1.86: enabling Symmetric IO mode ... ...done.
linux-2.1.86: ENABLING IO-APIC IRQs
linux-2.1.86: init IO_APIC IRQs
linux-2.1.86: IO-APIC pin 0, 16disabling PIRQ1
linux-2.1.86: disabling PIRQ2
linux-2.1.86: disabling PIRQ3
linux-2.1.86: , 20, 21, 22, 23 not connected.
linux-2.1.86: nr of MP irq sources: 19.
linux-2.1.86: nr of IOAPIC registers: 24.
linux-2.1.86: testing the IO APIC.......................
linux-2.1.86: .... register #00: 02000000
linux-2.1.86: ....... : physical APIC id: 02
linux-2.1.86: .... register #01: 00170011
linux-2.1.86: ....... : max redirection entries: 0017
linux-2.1.86: ....... : IO APIC version: 0011
linux-2.1.86: .... register #02: 00000000
linux-2.1.86: ....... : arbitration: 00
linux-2.1.86: .... IRQ redirection table:
linux-2.1.86: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
linux-2.1.86: 00 000 00 1 0 0 0 0 0 0 00
linux-2.1.86: 01 0FF 0F 0 0 0 0 0 1 1 59
linux-2.1.86: 02 0FF 0F 0 0 0 0 0 1 1 51
linux-2.1.86: 03 0FF 0F 0 0 0 0 0 1 1 69
linux-2.1.86: 04 0FF 0F 0 0 0 0 0 1 1 71
linux-2.1.86: 05 0FF 0F 0 0 0 0 0 1 1 79
linux-2.1.86: 06 0FF 0F 0 0 0 0 0 1 1 81
linux-2.1.86: 07 0FF 0F 0 0 0 0 0 1 1 89
linux-2.1.86: 08 0FF 0F 0 0 0 0 0 1 1 91
linux-2.1.86: 09 0FF 0F 0 0 0 0 0 1 1 99
linux-2.1.86: 0a 0FF 0F 0 0 0 0 0 1 1 A1
linux-2.1.86: 0b 0FF 0F 0 0 0 0 0 1 1 A9
linux-2.1.86: 0c 0FF 0F 0 0 0 0 0 1 1 B1
linux-2.1.86: 0d 000 00 1 0 0 0 0 0 0 00
linux-2.1.86: 0e 0FF 0F 0 0 0 0 0 1 1 C1
linux-2.1.86: 0f 0FF 0F 0 0 0 0 0 1 1 C9
linux-2.1.86: 10 000 00 1 0 0 0 0 0 0 00
linux-2.1.86: 11 0FF 0F 0 1 0 1 0 1 1 D9
linux-2.1.86: 12 0FF 0F 0 1 0 1 0 1 1 E1
linux-2.1.86: 13 0FF 0F 0 1 0 1 0 1 1 E9
linux-2.1.86: 14 000 00 1 0 0 0 0 0 0 00
linux-2.1.86: 15 000 00 1 0 0 0 0 0 0 00
linux-2.1.86: 16 000 00 1 0 0 0 0 0 0 00
linux-2.1.86: 17 000 00 1 0 0 0 0 0 0 00
linux-2.1.86: .................................... done.
linux-2.1.86: Starting kswapd v 1.23
linux-2.1.86: parport0: PC-style at 0x378 [SPP,PS2]
linux-2.1.86: parport0: no IEEE-1284 device present.
linux-2.1.86: Unknown interrupt
linux-2.1.86: Unknown interrupt
linux-2.1.86: Serial driver version 4.24 with no serial options enabled
linux-2.1.86: Keyboard timeout
linux-2.1.86: Keyboard timeout
linux-2.1.86: ttyS00 at 0x03f8 (irq = 4) is a 16550A
linux-2.1.86: ttyS02 at 0x03e8 (irq = 4) is a 16550A
linux-2.1.86: lp0: using parport0 (polling).
linux-2.1.86: PS/2 auxiliary pointing device detected -- driver installed.
linux-2.1.86: <Sound Blaster 16 (4.13)> at 0x220 irq 7 dma 1,5
linux-2.1.86: <Yamaha OPL3 FM> at 0x388
linux-2.1.86: Uniform CD-ROM driver Revision: 2.12
linux-2.1.86: Floppy drive(s): fd0 is 1.44M
linux-2.1.86: FDC 0 is a post-1991 82077
linux-2.1.86: PCI->APIC IRQ transform: (B0,I15,P0) -> 19
linux-2.1.86: aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 15
linux-2.1.86: aic7xxx: BIOS enabled, IO Port 0xf400, IO Mem 0xf0def000, IRQ 19, Revision C
linux-2.1.86: aic7xxx: Wide Channel, SCSI ID 7, 16/255 SCBs, QFull 16, QMask 0x1f
linux-2.1.86: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1/3.2
linux-2.1.86: scsi : 1 host.
linux-2.1.86: scsi0: Scanning channel A for devices.
linux-2.1.86: Vendor: QUANTUM Model: VIKING 4.5 WSE Rev: 880R
linux-2.1.86: Type: Direct-Access ANSI SCSI revision: 02
linux-2.1.86: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
linux-2.1.86: Vendor: iomega Model: jaz 1GB Rev: J.86
linux-2.1.86: Type: Direct-Access ANSI SCSI revision: 02
linux-2.1.86: Detected scsi removable disk sda at scsi0, channel 0, id 5, lun 0
linux-2.1.86: Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.00
linux-2.1.86: Type: CD-ROM ANSI SCSI revision: 02
linux-2.1.86: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
linux-2.1.86: scsi : detected 1 SCSI cdrom 2 SCSI disks total.
linux-2.1.86: SCSI device sda: hdwr sector= 512 bytes. Sectors= 8899737 [4345 MB] [4.3 GB]
linux-2.1.86: sda : READ CAPACITY failed.
linux-2.1.86: sda : status = 1, message = 00, host = 0, driver = 28
linux-2.1.86: sda : extended sense code = 2
linux-2.1.86: sda : block size assumed to be 512 bytes, disk size 1GB.
linux-2.1.86: NET3 PLIP version 2.3-parport gniibe@mri.co.jp
linux-2.1.86: plip0: Parallel port at 0x378, using IRQ -2
linux-2.1.86: early initialization of device plip0 is deferred
linux-2.1.86: PPP: version 2.3.3 (demand dialling)
linux-2.1.86: TCP compression code copyright 1989 Regents of the University of California
linux-2.1.86: PPP line discipline registered.
linux-2.1.86: PCI->APIC IRQ transform: (B0,I16,P0) -> 18
linux-2.1.86: eth0: 3Com 3c905 Boomerang 100baseTx at 0xecc0, 00:60:08:5c:52:b1, IRQ 18
linux-2.1.86: 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
linux-2.1.86: eth0: MII transceiver found at address 24.
linux-2.1.86: Enabling bus-master transmits and whole-frame receives.
linux-2.1.86: 3c59x.c:v0.47H 12/4/97 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
linux-2.1.86: Partition check:
linux-2.1.86: sda: sda1 sda2 sda3 sda4
linux-2.1.86: sdb:scsidisk I/O error: dev 08:10, sector 0
linux-2.1.86: unable to read partition table
linux-2.1.86: VFS: Mounted root (ext2 filesystem) readonly.
linux-2.1.86: Freeing unused kernel memory: 28k freed
linux-2.1.86: Adding Swap: 130748k swap-space (priority -1)
-log-stop-

-log-start-
linux-2.1.85: Cannot find map file.
linux-2.1.85: Linux version 2.1.85 (root@pike) (gcc version 2.8.0) #3 Wed Feb 4 16:50:59 CST 1998
linux-2.1.85: Intel MultiProcessor Specification v1.4
linux-2.1.85: Virtual Wire compatibility mode.
linux-2.1.85: OEM ID: INTEL Product ID: 440FX APIC at: 0xFEE00000
linux-2.1.85: Processor #1 Pentium(tm) Pro APIC version 17
linux-2.1.85: Processor #0 Pentium(tm) Pro APIC version 17
linux-2.1.85: I/O APIC #2 Version 17 at 0xFEC00000.
linux-2.1.85: Processors: 2
linux-2.1.85: INIT IRQ
linux-2.1.85: Console: 16 point font, 400 scans
linux-2.1.85: Console: colour VGA+ 80x25, 1 virtual console (max 63)
linux-2.1.85: PCI: BIOS32 Service Directory structure at 0xc00f9a30
linux-2.1.85: PCI: BIOS32 Service Directory entry at 0xfd7da
linux-2.1.85: PCI: PCI BIOS revision 2.10 entry at 0xfd9d6
linux-2.1.85: Probing PCI hardware.
linux-2.1.85: PCI->APIC IRQ transform: (B0,I0,P-1) -> -1
linux-2.1.85: PCI->APIC IRQ transform: (B0,I7,P-1) -> -1
linux-2.1.85: PCI->APIC IRQ transform: (B0,I7,P-1) -> -1
linux-2.1.85: PCI->APIC IRQ transform: (B0,I15,P0) -> -1
linux-2.1.85: PCI->APIC IRQ transform: (B0,I16,P0) -> -1
linux-2.1.85: PCI->APIC IRQ transform: (B0,I17,P0) -> -1
linux-2.1.85: Calibrating delay loop... 199.07 BogoMIPS
linux-2.1.85: Memory: 127848k/131072k available (1016k kernel code, 400k reserved, 1780k data, 28k init)
linux-2.1.85: Swansea University Computer Society NET3.039 for Linux 2.1
linux-2.1.85: NET3: Unix domain sockets 0.16 for Linux NET3.038.
linux-2.1.85: Swansea University Computer Society TCP/IP for NET3.037
linux-2.1.85: IP Protocols: ICMP, UDP, TCP
linux-2.1.85: VFS: Diskquotas version dquot_5.6.0 initialized
linux-2.1.85:
linux-2.1.85: Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
linux-2.1.85: Checking 'hlt' instruction... Ok.
linux-2.1.85: POSIX conformance testing by UNIFIX
linux-2.1.85: CPU1: Intel Pentium Pro stepping 09
linux-2.1.85: calibrating APIC timer ...
linux-2.1.85: ..... CPU clock speed is 199.3162 MHz.
linux-2.1.85: ..... APIC bus clock speed is 66.4385 MHz.
linux-2.1.85: Booting processor 0 eip 2000: Calibrating delay loop... 199.07 BogoMIPS
linux-2.1.85: OK.
linux-2.1.85: CPU0: Intel Pentium Pro stepping 09
linux-2.1.85: Total of 2 processors activated (398.13 BogoMIPS).
linux-2.1.85: mapping IO APIC from standard address.
linux-2.1.85: new virtual address: c8802000.
linux-2.1.85: enabling Symmetric IO mode ... ...done.
linux-2.1.85: unlisted board, DISABLING IO-APIC IRQs
linux-2.1.85: see Documentation/IO-APIC.txt to enable them
linux-2.1.85: init IO_APIC IRQs
linux-2.1.85: IO-APIC pin 16disabling PIRQ1
linux-2.1.85: disabling PIRQ2
linux-2.1.85: disabling PIRQ3
linux-2.1.85: , 20, 21, 22, 23 not connected.
linux-2.1.85: nr of MP irq sources: 19.
linux-2.1.85: nr of IOAPIC registers: 24.
linux-2.1.85: testing the IO APIC.......................
linux-2.1.85: .... register #00: 02000000
linux-2.1.85: ....... : physical APIC id: 02
linux-2.1.85: .... register #01: 00170011
linux-2.1.85: ....... : max redirection entries: 0017
linux-2.1.85: ....... : IO APIC version: 0011
linux-2.1.85: .... register #02: 04000000
linux-2.1.85: ....... : arbitration: 04
linux-2.1.85: .... IRQ redirection table:
linux-2.1.85: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
linux-2.1.85: 00 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 01 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 02 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 03 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 04 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 05 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 06 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 07 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 08 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 09 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 0a 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 0b 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 0c 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 0d 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 0e 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 0f 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 10 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 11 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 12 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 13 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 14 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 15 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 16 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: 17 000 00 1 0 0 0 0 0 0 00
linux-2.1.85: .................................... done.
linux-2.1.85: Starting kswapd v 1.23
linux-2.1.85: parport0: PC-style at 0x378 [SPP,PS2]
linux-2.1.85: parport0: no IEEE-1284 device present.
linux-2.1.85: lp0: using parport0 (polling).
linux-2.1.85: PS/2 auxiliary pointing device detected -- driver installed.
linux-2.1.85: <Sound Blaster 16 (4.13)> at 0x220 irq 7 dma 1,5
linux-2.1.85: <Yamaha OPL3 FM> at 0x388
linux-2.1.85: Uniform CD-ROM driver Revision: 2.12
linux-2.1.85: Floppy drive(s): fd0 is 1.44M
linux-2.1.85: FDC 0 is a post-1991 82077
linux-2.1.85: PCI->APIC IRQ transform: (B0,I15,P0) -> -1
linux-2.1.85: aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 15
linux-2.1.85: aic7xxx: BIOS enabled, IO Port 0xf400, IO Mem 0xf0def000, IRQ 11, Revision C
linux-2.1.85: aic7xxx: Wide Channel, SCSI ID 7, 16/255 SCBs, QFull 16, QMask 0x1f
linux-2.1.85: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1/3.2
linux-2.1.85: scsi : 1 host.
linux-2.1.85: scsi0: Scanning channel A for devices.
linux-2.1.85: Vendor: QUANTUM Model: VIKING 4.5 WSE Rev: 880R
linux-2.1.85: Type: Direct-Access ANSI SCSI revision: 02
linux-2.1.85: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
linux-2.1.85: Vendor: iomega Model: jaz 1GB Rev: J.86
linux-2.1.85: Type: Direct-Access ANSI SCSI revision: 02
linux-2.1.85: Detected scsi removable disk sda at scsi0, channel 0, id 5, lun 0
linux-2.1.85: Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.00
linux-2.1.85: Type: CD-ROM ANSI SCSI revision: 02
linux-2.1.85: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
linux-2.1.85: scsi : detected 1 SCSI cdrom 2 SCSI disks total.
linux-2.1.85: SCSI device sda: hdwr sector= 512 bytes. Sectors= 8899737 [4345 MB] [4.3 GB]
linux-2.1.85: sda : READ CAPACITY failed.
linux-2.1.85: sda : status = 1, message = 00, host = 0, driver = 28
linux-2.1.85: sda : extended sense code = 2
linux-2.1.85: sda : block size assumed to be 512 bytes, disk size 1GB.
linux-2.1.85: NET3 PLIP version 2.3-parport gniibe@mri.co.jp
linux-2.1.85: plip0: Parallel port at 0x378, using IRQ -2
linux-2.1.85: early initialization of device plip0 is deferred
linux-2.1.85: PPP: version 2.3.3 (demand dialling)
linux-2.1.85: TCP compression code copyright 1989 Regents of the University of California
linux-2.1.85: PPP line discipline registered.
linux-2.1.85: PCI->APIC IRQ transform: (B0,I16,P0) -> -1
linux-2.1.85: eth0: 3Com 3c905 Boomerang 100baseTx at 0xecc0, 00:60:08:5c:52:b1, IRQ 15
linux-2.1.85: 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
linux-2.1.85: eth0: MII transceiver found at address 24.
linux-2.1.85: Enabling bus-master transmits and whole-frame receives.
linux-2.1.85: 3c59x.c:v0.47H 12/4/97 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
linux-2.1.85: Partition check:
linux-2.1.85: sda: sda1 sda2 sda3 sda4
linux-2.1.85: sdb:scsidisk I/O error: dev 08:10, sector 0
linux-2.1.85: unable to read partition table
linux-2.1.85: VFS: Mounted root (ext2 filesystem) readonly.
linux-2.1.85: Freeing unused kernel memory: 28k freed
linux-2.1.85: Adding Swap: 130748k swap-space (priority -1)
-log-stop-



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:41    [W:0.043 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site