Messages in this thread |  | | | Date | Fri, 11 Dec 1998 10:19:21 -0600 (CST) | | From | "Andre M. Hedrick" <> | | Subject | IDE-Driver UPDATES towards ATA4 (2.0.36)(2.1.131) |
| |
"hdparm-3.5b.patch.gz" patch against "hdparm-3.5"
"2.0.36.patch.udma7.gz" and report "syslog.36"
Above patch has only chipset support equal to previous. Aladdin is not supported, until some back codes the work from 2.1.131.ide.update.26.
"2.1.131.ide.update.26.gz" "2.1.131.ide.update.26-ac6.gz" "2.1.131.ide.update.26-ac7.gz" and report "syslog.131"
These patches are stress tested to a half-step of over-clocking. Dual PPro 200MHz 512k pushed to 233MHz on a 66MHz apic bus clock and a 33MHz PCI bus clock.
There are correct drive sizings up to 8Gig tested. I should be getting a new 12Gig in the mail for final blanket tests.
hdparm -i /dev/hda
/dev/hda: Model=QUANTUM FIREBALL SE8.4A, FwRev=APC.0B00, SerialNo=338713591007 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=4 BuffType=3(DualPortCache), BuffSize=80kB, MaxMultSect=16, MultSect=16 DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=2(fast) --------- TEST ------------- CurCHS=1027/255/63, CurSects=16514064, LBAsects=16514064 --------- TEST ------------- LBA CHS=1027/255/63 Native, LBAsects=16514064 tDMA={min:120,rec:120}, DMA modes: sword0 sword1 sword2 mword0 mword1 mword2 IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4 UDMA modes: mode0 mode1 *mode2 hdparm -i /dev/hdc
/dev/hdc: Model=Maxtor 72004 AP, FwRev=2A3C1845, SerialNo=U905GS4S Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>5Mbs FmtGapReq } RawCHS=3893/16/63, TrkSize=0, SectSize=0, ECCbytes=34 BuffType=3(DualPortCache), BuffSize=128kB, MaxMultSect=32, MultSect=32 DblWordIO=yes, maxPIO=2(fast), DMA=yes, maxDMA=1(medium) CurCHS=3893/16/63, CurSects=3924144, LBA=yes, LBAsects=3924360 WARNING 216 ORPHANED SECTORS :: USE LBA TRANSLATIONS --------- TEST ------------- CurCHS=3893/16/63, CurSects=3924144, LBAsects=3924360 --------- TEST ------------- tDMA={min:120,rec:120}, DMA modes: sword0 sword1 *sword2 mword0 mword1 *mword2 IORDY=on/off, tPIO={min:180,w/IORDY:120}, PIO modes: mode3 mode4
Cheers, Andre Hedrick The IDE-FNG for Linux The APC UPS Specialist for Linux
http://www.dyer.vanderbilt.edu/server/udma/ http://www.dyer.vanderbilt.edu/server/apcupsd/apcupsd-3.5.0.bin.tar.gz
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
|  |