Messages in this thread | | | Date | Tue, 1 Dec 1998 12:27:58 +0100 | From | Paul Slootman <> | Subject | Re: PATCH: Different SCSI ordering for WIDE SCSI chains. |
| |
In article <3662D55D.A31769E5@airways.com> lancer@airways.com wrote: > >When mixing narrow and wide devices you must only use the first eight >scsi ids. If you don't, scsi arbitration will not work correctly. The >scsi bus uses the data bits to arbitrate for the bus. A narrow device >does not see the upper eight arbitration bits and can fowl things up. >Your wide devices can still work in wide mode, but their addresses >should be set between 0 and 7 where the narrow devices can see them for >arbitration.
This is not true. Your narrow devices will simply see that they are not selected when one of the wide devices on address 8 and up is selected, and ignore it. As long as you keep your adapter on a low address, all will be well (unless you want to initiate direct transfers between two devices, but if you're doing that, you know what you're doing anyway).
So, using wide devices on addresses 8 and up is NOT a problem, even if you use narrow devices as well.
Paul Slootman -- home: paul@wurtel.demon.nl | work: paul@murphy.nl | debian: paul@debian.org http://www.wurtel.demon.nl | Murphy Software, Enschede, the Netherlands
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |