lkml.org 
[lkml]   [1998]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.0.3x -- hanging network interfaces
> > > During periods of high load the eth0 card wedges itself.  The eth1
> > > interface remain active. Downing and upping both interfaces clears
>
> One other thing that I noticed is that the the only errors we see on
> the cards are TX errors. On the one occassion when the eth1 interface
> stuck there were a string of transmit errors in the logs as well.

I've seen this too with Linux 2.0.36-pre14 and a 3c509 (without shared
IRQs).
I have until now assumed it was a hardware problem.

First I get a lot of "eth0: transmit timed out, tx_status 00 status
e000"
then the eth0 NIC hangs.

eth1 never hangs, and that is a 3c509 too.

--
Daniel.Deimert@intermec.com Intermec Printer AB, Göteborg, Sweden
http://isgot.eu.intermec.com/ Intermec Identification Systems Division

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:45    [W:0.028 / U:1.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site