Messages in this thread | | | Date | Wed, 07 Jan 1998 11:11:27 -0000 (GMT) | From | Tony Gale <> | Subject | [2.1.78] aha1542.c problem |
| |
I don't know who has been doing the changes to the aha1542 driver, but they cause my CDROM player to not be detected properly, with the card and device being reset.
Boot messages are:
Configuring Adaptec (SCSI-ID 7) at IO :334, IRQ 10, DMA priority 5 aha1542.c: Using extended bios translation scsi0 : Adaptec 1542 scsi : 1 host. Vendor: DEC Model: DSP3105S Rev: 386C Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 2, lun 0 Vendor: SEAGATE Model: ST31200N Rev: 8648 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 4, lun 0 Vendor: NEC Model: CD-ROM DRIVE:502 Rev: 2.3 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0 scsi : detected 1 SCSI cdrom 2 SCSI disks total. aha1542.c: Trying device reset for target 5 HACC aha1542.c: interrupt received, but no mail. Sent BUS RESET to scsi host 0 SCSI device sda: hdwr sector= 512 bytes. Sectors= 2050860 [1001 MB] SCSI device sda: hdwr sector= 512 bytes. Sectors= 2061108 [1006 MB]
Thanks
Tony -- E-Mail: Tony Gale <gale@minotaur.dra.hmg.gb> So many men, so many opinions; every one his own way. -- Publius Terentius Afer (Terence)
The views expressed above are entirely those of the writer and do not represent the views, policy or understanding of any other person or official body.
| |