lkml.org 
[lkml]   [1998]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ide-cd as a modules not working in the latest kernels?
Have you tried adding the line "hdX=cdrom" to your kernel command line
where "X" is the drive letter of your ATAPI cdrom drive? Did that help?

-Erik

--
Erik B. Andersen Web: http://www.inconnect.com/~andersen/
email: andersee@debian.org
--This message was written using 73% post-consumer electrons--


On Tue, 27 Jan 1998, Kjartan Maraas wrote:

> I am unable to get to my cdrom a Acer/Jas CD-910E 10X.
> I'm not sure about the 2.0 series (because I have
> not compiled one of these in a long time.)
>
> The story goes like this:
>
> A while ago I flashed a new bios for my MB (asus p2t4 rev 3.1) and my
> cdrom disappeared. This was also the case under Win95. Fine revert to
> the old bios and all was back to normal.
>
> Later I have tried some newer beta-bioses and now the cdrom is gone in
> linux when compiled as a module, but has come back under Win95
> This leads me to think there is a problem with the cdrom-driver in linux
> when compiled as a module.
>
> This is an IDE-CDROM as master on the second port.
>
> I'll be glad to provide more info on this if someone tells me what to
> look for.
>
> Cheers and keep up the good work.
>
> Kjartan
>


\
 
 \ /
  Last update: 2005-03-22 13:41    [W:0.061 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site