lkml.org 
[lkml]   [1998]   [Jan]   [19]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateMon, 19 Jan 1998 09:12:29 -0200 (EDT)
From"" <>
SubjectOops errors
Hi,

I'm sending some pieces of message file of a machine with some Oop
errors.

This machine runs RedHat 5.0 with the most recente rpm packages and with
kernel 2.0.33.

If you find something that con help me I would apreciate.

Thanks in advance,

Luis Bravo
bravo@csn.com.br


Console: 16 point font, 400 scans

Console: colour VGA+ 80x25, 1 virtual console (max 63)
Calibrating delay loop.. ok - 35.84 BogoMIPS

Memory: 63300k/65536k available (688k kernel code, 384k reserved, 1164k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.

Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP

VFS: Diskquotas version dquot_5.6.0 initialized


Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.

Intel Pentium with F0 0F bug - workaround enabled.

alias mapping IDT readonly ...  ... done

Linux version 2.0.33 (root@srv2.csn.com.br) (gcc version 2.7.2.3) #1 Tue Jan 6 07:54:10 EDT 1998
Starting kswapd v 1.4.2.2 

Serial driver version 4.13 with no serial options enabled
lp1 at 0x0378, (polling)

PS/2 auxiliary pointing device detected -- driver installed.
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7

hda: ACER CD-910E/JAS, ATAPI CDROM drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M

FDC 0 is an 8272A

aic7xxx: <Adaptec AIC-7770 SCSI host adapter> at EISA 9
aic7xxx: BIOS enabled, IO Port 0x9c00, IRQ 11 (level sensitive), Revision <= C
aic7xxx: Twin Channel, A SCSI ID 7, B SCSI ID 7, 4/4 SCBs, QFull 4, QMask 0x7
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1.1/3.2.1
scsi : 1 host.

scsi0: Scanning channel A for devices.

  Vendor: QUANTUM   Model: EMPIRE_1080S      Rev: 1242
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: SONY      Model: SDT-2000E         Rev: 3.25
  Type:   Sequential-Access                  ANSI SCSI revision: 02
Detected scsi tape st0 at scsi0, channel 0, id 1, lun 0
  Vendor: QUANTUM   Model: XP34301           Rev: 1051
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
scsi0: Scanning channel B for devices.

scsi : detected 1 SCSI tape 2 SCSI disks total.

SCSI device sda: hdwr sector= 512 bytes. Sectors= 2109376 [1029 MB] [1.0 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8410200 [4106 MB] [4.1 GB]
eth0: 3c509 at 0x300 tag 1, 10baseT port, address  00 20 af 73 c5 2b, IRQ 10.
3c509.c:1.12 6/4/97 becker@cesdis.gsfc.nasa.gov

Partition check:

 sda: sda1 sda2 < sda5 >
 sdb: sdb1 sdb2 sdb4 < sdb5 >
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
sysctl: ip forwarding off
[unhandled content-type:application/x-gunzip]
\
 
 \ /
  Last update: 2005-03-22 12:41    [from the cache]
©2003-2008