[lkml]   [1997]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject2.1.66 serial driver broken -- baud rates..
The 2.1.66 kernel seems to have trouble on my machine
when setting baud rates.. I normally use setserial /dev/modem spd_vhi
to specify 115200, but the actual rate used is more like 9600 instead.

Ports are just standard motherboard stuff on an ASUS board (16550A..).

Not sure where to begin looking, other than at the extensive driver
updates in 2.1.66..

The Linux IDE guy

 \ /
  Last update: 2005-03-22 13:40    [W:0.054 / U:5.736 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site