lkml.org 
[lkml]   [1996]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
DateFri, 6 Dec 1996 16:47:47 -0800 (PST)
FromEric Hoeltzel <>
SubjectRe: Linux VCR driver?



On Thu, 5 Dec 1996, 2nb wrote:

> ok, let me give you some info about arvid (a device able to turn you vhs
> vcr into a backup device). there are 4 sold model ov the board:
>
> model speed price capacity on minimal harware config
> (kb/s) (usd) a E180 tape req. to ran at full speed
>
> 1010 100 1.05gb 286/16
> 1020 200 35 2.1gb 386dx33 (this model desn't
> work some motherboards)
> 1031 200 65 2.1gb 386dx33
> 1051 325 80 3.5gb 486dx100
>
> 1010 and 1020 model are no longer manufactured..
>
> arvid requires a vhs vcr pal or secam, but don' work on ntsc
> it controls the vcr via a led that you need to attach in the front of
> your vcr. it can learn your remote contcol command just like a programble
> remote control, and is shiped with a huje database of vcrs, so there is a
> big chace that you will need only to pick your vcr model from the list and
> it will work.. after you setup the ifra red control, the is a setup
> procedure to mesure time that you vct take to start playing, stop, rewind,
> etc..


---snip------
Is there a solution to the NTSC/PAL issue? I am in the US.
Also, what does "secam" mean?

Thanks
Eric



\
 
 \ /
  Last update: 2005-03-22 13:38    [from the cache]
©2003-2010