lkml.org 
[lkml]   [1996]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subjectncr53c8xx
    Reading on the documentation of the ncr53c8xx driver I've seen that this
    driver support the proc filesystem, but on my system it doesn't.

    if i issue
    % cat /proc/scsi/ncr53c7xx /* which, with 'scsi' are the all 2 files
    here */
    i obtain:
    The driver does not yet support the proc-fs

    The board says 53c810 ( but it's a chip with bios and I think it's a
    53c815 ).
    I used a normal 2.1.6 kernel ( but the problem is the same in very old
    kernels).

    The proc filesystem is compiled in the kernel and perfeclty running.
    I enabled CONFIG_SCSI_NCR53C7xx_sync, CONFIG_SCSI_NCR53C7xx_FAST,
    CONFIG_SCSI_NCR53C7xx_DISCONNECT and the driver is not a module (I don't
    know what else could be useful for you).

    P.S.
    I'm not on the kernel mailing list.
    --
    +-----------------+
    | MarcoGhidinelli |
    +-----------------+

    \
     
     \ /
      Last update: 2005-03-22 13:38    [W:0.018 / U:32.708 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site