lkml.org 
[lkml]   [1996]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Any Information about Win95 DCC Protocoll and Cable

A standard RS232 cable can be used w/ a null modem adapter to achieve the
same effect..

ameth

| shepard@ameth.org |
= http://www.ameth.org =
| Administrator, Ameth Technologies |

On Tue, 12 Nov 1996, Uwe Bonnes wrote:

>
> Hallo,
>
> I have been searching the net over and over, but didn't find any usefull
> information about both topics. Seems M*cr*s*ft purchased that technologie
> from Parallel Technologies ...
>
> Anyway, I am looking for information on the cable needed to connect and the
> protocol spoken on that cable with Microsofts Direct Cable Connection.
>
> If anyone can point me to something usefull, I would be gratefull.
>
> The information to build a ECP DCC Cable could be achieved too if
> someone with such a cable would measure with a Ohm-meter which Pins are
> connected.
>
> --
> Uwe Bonnes bon@elektron.ikp.physik.th-darmstadt.de
>
> Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
> --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
>


\
 
 \ /
  Last update: 2005-03-22 13:38    [W:0.657 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site