lkml.org 
[lkml]   [2024]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3/5] mtd: rawnand: gpmi: add iMX8QXP support.
From: Han Xu <han.xu@nxp.com>

Add "fsl,imx8qxp-gpmi-nand" compatible string. iMX8QXP gpmi nand is similar
with iMX7D. But it using 4 clock: "gpmi_io", "gpmi_apb", "gpmi_bch" and
"gpmi_bch_apb".

Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 20 +++++++++++++++++---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h | 4 ++++
2 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index e71ad2fcec232..f90c5207bacb6 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -983,7 +983,8 @@ static int gpmi_setup_interface(struct nand_chip *chip, int chipnr,
return PTR_ERR(sdr);

/* Only MX28/MX6 GPMI controller can reach EDO timings */
- if (sdr->tRC_min <= 25000 && !GPMI_IS_MX28(this) && !GPMI_IS_MX6(this))
+ if (sdr->tRC_min <= 25000 && !GPMI_IS_MX28(this) &&
+ !(GPMI_IS_MX6(this) || GPMI_IS_MX8(this)))
return -ENOTSUPP;

/* Stop here if this call was just a check */
@@ -1178,6 +1179,18 @@ static const struct gpmi_devdata gpmi_devdata_imx7d = {
.clks_count = ARRAY_SIZE(gpmi_clks_for_mx7d),
};

+static const char *gpmi_clks_for_mx8qxp[GPMI_CLK_MAX] = {
+ "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb",
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx8qxp = {
+ .type = IS_MX8QXP,
+ .bch_max_ecc_strength = 62,
+ .max_chain_delay = 12000,
+ .clks = gpmi_clks_for_mx8qxp,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx8qxp),
+};
+
static int acquire_register_block(struct gpmi_nand_data *this,
const char *res_name)
{
@@ -2281,7 +2294,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
* (1) the chip is imx6, and
* (2) the size of the ECC parity is byte aligned.
*/
- if (GPMI_IS_MX6(this) &&
+ if ((GPMI_IS_MX6(this) || GPMI_IS_MX8(this)) &&
((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
ecc->read_subpage = gpmi_ecc_read_subpage;
chip->options |= NAND_SUBPAGE_READ;
@@ -2692,7 +2705,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
this->base.ops = &gpmi_nand_controller_ops;
chip->controller = &this->base;

- ret = nand_scan(chip, GPMI_IS_MX6(this) ? 2 : 1);
+ ret = nand_scan(chip, (GPMI_IS_MX6(this) || GPMI_IS_MX8(this)) ? 2 : 1);
if (ret)
goto err_out;

@@ -2721,6 +2734,7 @@ static const struct of_device_id gpmi_nand_id_table[] = {
{ .compatible = "fsl,imx6q-gpmi-nand", .data = &gpmi_devdata_imx6q, },
{ .compatible = "fsl,imx6sx-gpmi-nand", .data = &gpmi_devdata_imx6sx, },
{ .compatible = "fsl,imx7d-gpmi-nand", .data = &gpmi_devdata_imx7d,},
+ { .compatible = "fsl,imx8qxp-gpmi-nand", .data = &gpmi_devdata_imx8qxp, },
{}
};
MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
index c3ff56ac62a7e..502f01a8338c3 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
@@ -78,6 +78,7 @@ enum gpmi_type {
IS_MX6Q,
IS_MX6SX,
IS_MX7D,
+ IS_MX8QXP,
};

struct gpmi_devdata {
@@ -172,8 +173,11 @@ struct gpmi_nand_data {
#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
#define GPMI_IS_MX7D(x) ((x)->devdata->type == IS_MX7D)
+#define GPMI_IS_MX8QXP(x) ((x)->devdata->type == IS_MX8QXP)

#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \
GPMI_IS_MX7D(x))
+
+#define GPMI_IS_MX8(x) (GPMI_IS_MX8QXP(x))
#define GPMI_IS_MXS(x) (GPMI_IS_MX23(x) || GPMI_IS_MX28(x))
#endif
--
2.34.1


\
 
 \ /
  Last update: 2024-05-27 18:30    [W:0.135 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site