lkml.org 
[lkml]   [2024]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 21/25] dt-bindings: media: imx258: Add binding for powerdown-gpio
Hi Luis,

On Wed, May 01, 2024 at 09:24:38AM -0600, git@luigi311.com wrote:
> From: Ondrej Jirman <megi@xff.cz>
>
> Add powerdown-gpio binding as it is required for some boards.

I thought the conclusion was that this wasn't a property of the sensor? If
it needs to be controlled, then this should take place somewhere else than
in the sensor driver.

>
> Signed-off-by: Ondrej Jirman <megi@xff.cz>
> Signed-off-by: Luis Garcia <git@luigi311.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Pavel Machek <pavel@ucw.cz>
> ---
> Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
> index c978abc0cdb3..33338139e6e8 100644
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
> @@ -36,6 +36,10 @@ properties:
> reg:
> maxItems: 1
>
> + powerdown-gpios:
> + description:
> + Reference to the GPIO connected to the PWDN pin, if any.
> +
> reset-gpios:
> description: |-
> Reference to the GPIO connected to the XCLR pin, if any.

--
Regards,

Sakari Ailus

\
 
 \ /
  Last update: 2024-05-27 18:30    [W:0.191 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site