Messages in this thread | ![/](/images/icornerl.gif) | | Subject | Re: [BUG] 2.6.16.2 (like olders) fails to suspend audio device | From | Lee Revell <> | Date | Sat, 08 Apr 2006 12:27:02 -0400 |
| |
It would help if you cc'ed the right list (added)
On Sat, 2006-04-08 at 15:31 +0200, Patrizio Bassi wrote: > I've already posted same bug some weeks ago. > > this is just a reminder and to confirm bug is still there. > > 00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) > > Alsa driver: 1370 > > 1) if builtin in kernel, on resume it doesn't work any more. > 2) if built as module on resume it works with no need to remove/readd > module. > > in both situations dmesg shows: > > pnp: Failed to activate device 00:0b. > > > Stopping tasks: ===========================================| > Shrinking memory... done (39214 pages freed) > pnp: Device 00:0c disabled. > pnp: Device 00:08 disabled. > swsusp: Need to copy 13752 pages > ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) > -> IRQ 9 > ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low) > -> IRQ 9 > ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low) > -> IRQ 9 > ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) > -> IRQ 5 > ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKD] -> GSI 9 (level, low) > -> IRQ 9 > ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNKA] -> GSI 11 (level, > low) -> IRQ 11 > usb usb1: root hub lost power or was reset > ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, > low) -> IRQ 10 > pnp: Device 00:08 activated. > pnp: Failed to activate device 00:0b. > pnp: Device 00:0c activated. > Restarting tasks... done > agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0. > agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode > agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode > > lspci > 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host > bridge (rev 03) > 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP > bridge (rev 03) > 00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) > 00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) > 00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) > 00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) > 00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] > (rev 74) > 00:0a.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 50) > 00:0a.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 50) > 00:0a.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) > 00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) > 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP > > > dmesg says 00:08 and 00:0c are activated..but i've no idea which devices > they are, lspci -vv shows nothing about that. > > Ready to give more infos and test patches. > > Patrizio Bassi > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |